top of page

Ongoing Chakra Check-In Class

Public·68 members
Castor Panfilov
Castor Panfilov

Official Samsung Galaxy Note 3 LTE SM-N9005 Stock Rom

How to Install Official Samsung Galaxy Note 3 LTE SM-N9005 Stock Rom

If you want to restore your Samsung Galaxy Note 3 LTE SM-N9005 to its original factory settings, you can use the official stock rom from Samsung. This will help you fix any software issues, such as bootloop, stuck on logo, or malware infection. You will also get the latest security patches and Android updates from Samsung.

Official Samsung Galaxy Note 3 LTE SM-N9005 Stock Rom


Before you proceed, make sure you have backed up your important data, as this process will wipe everything on your device. You also need to have a Windows PC, a USB cable, and the following files:

  • Official Samsung Galaxy Note 3 LTE SM-N9005 Stock Rom: Download from here.

  • Odin Flash Tool: Download from here.

  • Samsung USB Drivers: Download from here.

Once you have downloaded and extracted the files, follow these steps to install the stock rom:

  • Turn off your device and boot into download mode by pressing and holding Volume Down + Home + Power buttons together for a few seconds. Release the buttons when you see a warning screen and press Volume Up to confirm.

  • Connect your device to your PC using the USB cable. Odin should recognize your device and show a blue or green box in the ID:COM section.

  • Click on the AP button in Odin and browse to the stock rom file that you extracted earlier. It should have a .tar.md5 extension.

  • Make sure that only Auto Reboot and F. Reset Time options are checked in Odin. Do not check any other options or change any settings.

  • Click on the Start button in Odin and wait for the flashing process to complete. It may take several minutes, so do not disconnect your device or interrupt the process.

  • Once the flashing is done, your device will reboot automatically. You can disconnect your device from your PC and wait for it to boot up normally.

Congratulations! You have successfully installed the official Samsung Galaxy Note 3 LTE SM-N9005 stock rom on your device. You can now enjoy the original firmware and features from Samsung.

If you encounter any problems or errors while installing the stock rom, you can try the following troubleshooting tips:

  • Make sure you have downloaded the correct stock rom for your device model and region. You can check your device model number by going to Settings > About device.

  • Make sure you have installed the latest Samsung USB drivers on your PC and enabled USB debugging on your device. You can enable USB debugging by going to Settings > Developer options and tapping on the USB debugging switch.

  • Make sure you have enough battery charge on your device before starting the flashing process. It is recommended to have at least 50% battery level.

  • Make sure you are using the original USB cable that came with your device or a compatible one. Avoid using any adapters or hubs.

  • Make sure you are using the latest version of Odin flash tool and run it as administrator on your PC.

  • If Odin gets stuck or fails to flash the stock rom, you can try to close it and restart it. You can also try to use a different USB port or a different PC.

If none of these tips work, you can contact Samsung customer support or vi